Created on 11.16

Collaborative Palletizing for Bottled Products: Key Applications and Considerations

Items that are bottle-packed tend to be manufactured when producing beverages, foods, and cleaning items. After filling, capping, labeling, and packing products, they should be set for storage and distribution. Towards the last stages of the manufacturing process, cases and multipacks of shrink wrap need to be stacked on pallets.
Palletization manually may sometimes involve lifting and handling at times, especially in production lines where there is a constant flow of packaged goods. A cobot can perform the routine tasks but lets humans perform other functions such as material handling and swapping of pallets.
However, not every bottled product line is suitable for collaborative palletizing. Package format, load weight, gripping method, pallet pattern, and required production rate all affect the result. This article looks at how collaborative palletizing can be applied to bottled product packages and what manufacturers should consider before introducing a system.
Cartons being palletized on a production line

Common Palletizing Challenges in Bottled Product Lines

Bottled products can reach the palletizing stage in several packaging formats. They may be packed in corrugated cartons, grouped into shrink-wrapped multipacks, or arranged in other secondary packaging formats. Each format presents different handling requirements.
Package weight and dimensions
The weight of a finished package depends on the number and size of bottles, the product inside, and the secondary packaging materials. A carton containing multiple bottles may be considerably heavier than an individual bottle. Its size also influences the robot’s picking up and placing of the package.
When choosing the robot and tooling, the overall load must be taken into account. In order not to exceed the load capacity of the robot, one should take into account the gripper weight, along with the product package itself.
Package stability during handling
Since bottles contain liquids, any abrupt movement may result in them shifting. While the bottles themselves are packed either in cartons or in plastic, the package must still be stable during pickup, handling, and placing.
Packages that are loosely packed, have an uneven weight distribution, or lack the proper amount of support will be more difficult to handle. It is necessary to test the gripping technique and the robot's handling of the products.
Pallet stacking should always be consistent
The completed pallet should always remain stable for easy transportation and storage. The packages must be stacked in an appropriate layer pattern that depends on size, load distribution, and orientation.
When there is variation in package sizes from one type of product to another, the palletization process may require an alternative pattern. The chosen method should be capable of reproducing the pattern.

Handling Packages of Bottled Products in a Collaborative Robot Cell

The collaborative palletizing cell is usually supplied with a package of finished products from the preceding conveyor and loads it onto a pallet using the programmed scheme.
In the case of bottled products, the robot is supplied with a secondary package of products but not with individual bottles without protective packaging. This approach is also used in beverage manufacturing, where collaborative robots can handle packaged bottled products such as cases of bottled water. For example, Robotiq's beverage palletizing case demonstrates how a collaborative robot can be used to palletize cases of bottled water.

From Package Collection to Pallet Placement

The cycle typically starts when the completed packages come off the upstream device, like a case packer or a shrink wrapper. Packages are brought by a conveyor onto the work area of the robot.
Then each package is picked up by the robot and placed in the designated place on the pallet. The sequence of palletization is performed according to the prearranged pallet pattern, where each layer is stacked based on the package size and palletization rules.
Gripping is another crucial element of the process. Depending on the materials of the packages, their surface and weight, vacuum grippers, mechanical grippers, or any other EOAT can be applied. Finally, this decision needs to be made with the help of application testing.
A palletizing cycle may include pallet positioning, complete pallet picking, and the supplying of empty pallets. All these processes have to be taken into account when planning the whole cycle.

Handling Different Bottled Product Packages

A production facility may handle several bottle sizes, carton dimensions, or multipack formats. When the package specifications change, the palletizing system needs to accommodate the corresponding gripping and stacking requirements.
Recipe-based operation can help manage different pallet patterns and product configurations when supported by the selected system. An operator is capable of choosing the right parameters for a specific product as opposed to developing a completely new process for each production cycle.
Nevertheless, using the recipes does not automatically mean that all packages can be gripped with one gripper. Divergent characteristics of the packages, including size, weight, and surface, may necessitate tool modification or further testing.
Collaborative robot palletizing cartons of bottled products on a production line

Important Factors for Effective Palletizing of Bottled Products

Efficient palletizing goes beyond just the robotic motion. It is important for the package, the gripping device, the pallet pattern, and the line to be coordinated.

1. Selection of the Gripper and Suitability for Packaging

The gripper should grip the packaging firmly without damaging the packaging material. For example, the vacuum gripper can be used on a particular carton surface that is flat and well-sealed, whereas a mechanical type of gripper is better suited for other types of packages.
In the case of shrink-wrapped multipacks, the gripping process should consider the strength of the film and positioning of bottles inside the pack. It should be tested whether the package slips or deforms in any way during the process.

2. Pallet Configuration and Stabilization

The pallet configuration will help in arranging the packages on each level of the pallet. This would ensure that the load is distributed effectively throughout the process of construction of the pallet.
The manufacturer must be sure about the dimensions of the pallet, packaging orientation, number of packages in each level, and the total number of levels to be programmed.

3. Payload and Reach of Robot

The payload of the robot has to consider the sum of the weight of the package and the weight of the robot arm. The reach of the robot also has to allow it to access all the necessary pickup and place points.
Where there are different packages and pallets used in an application, the reach and path of travel of the robot has to be considered for the entire system layout. Even where a robot is adequate for the payload requirements, it may be inadequate in terms of reach.

4. Production Rate and Package Flow

The palletizing system has to operate at the same speed as the upstream packaging equipment. The production rate will depend on several aspects, such as pickup of the package, robot motion, placing of the package, pallet pattern, and pallet changeover.
A trial run may be inadequate to gauge the performance during production operation. Validation has to be carried out for the intended package flow.

When Is the Collaborative Palletizer a Good Fit for Bottles?

A collaborative palletizer may be a good option in cases where there is a need to palletize medium quantities, diverse packaging, or varying formats of products.
A collaborative palletizer may also be chosen when there is an importance placed on the floor space availability or accessibility to operators within the cell design. Nevertheless, it is necessary to assess the entire footprint of the system, including conveyors, pallets, safety equipment, and material handling.
Before deciding on a collaborative palletizer, manufacturers should consider:
  • Dimensions and weight of the finished packages
  • Whether products are packaged in cartons or shrink-wrapped multipacks
  • Cases per minute or pallets per hour required
  • The number of specifications of the product and pallet configurations
  • Robot working area and space for pallet exchange
  • Method of gripping and the type of end-of-arm tooling
  • Safety needs of the complete palletizing cell
A robot should not be chosen only because it is a collaborative one. The rightness of the whole application needs to be verified through risk assessment and testing.

Collaborative Palletizing Robots from Techflowbot

Techflowbot supplies robotic packaging and end-of-line automation solutions for manufacturers operating in various fields such as the food industry, beverages, household chemicals, and other industrial applications. The company offers a wide range of solutions like robotic case packing, palletizing, depalletizing, conveying, and line integrations.
As for manufacturers who are looking for collaborative palletizing, the company provides them with the CPR series that includes CPR-25, CPR-30, and CPR-50.
  • CPR-25:Maximum payload of 25 kg
  • CPR-30:Maximum payload of 30 kg
  • CPR-50:Maximum payload of 50 kg
The selection of the right model depends on the weight of the packages, grippers, working range, and production rate. Also, the maximum payload capacity cannot be considered the optimal package weight without considering the end-of-arm tooling.
When it comes to bottled products, it is especially important what kind of secondary packaging is used. It is necessary to test cartons and shrink-wrapped multipacks for gripping reliability, package stability, and the required pallet pattern.

Conclusion

Collaborative palletizing could provide automation for repetitive handling processes at the end of production lines for bottled goods. If the produced goods are packed into cartons or shrink-wrapped multipacks, then a proper cobot system will take these packages and stack them in a certain pattern onto pallets.
The performance of the application is guaranteed through the selection of the right combination of the robot, gripping device, packages, and pallet pattern. It is necessary to consider the production rate, available floor space, and safety requirements of the entire cell.
It is recommended to perform tests with samples of packages and the chosen pallet pattern before buying such a system to see if it is able to meet the requirements of the production line.

Contact

Leave your information and we will contact you.

Contact

E-mail: info@techflowbot.com

Tel: +86 18616129085

Add: 99 Shenmei Road, Pudong New District, Shanghai