Created on 11.09

How Robotic Packaging Solutions Are Transforming Industrial Automation

A robot packaging system is an automated system that uses robotics, controls, and tools to pick up, pack, and transport materials within a production line. Vision systems are also used in some robot packaging systems for product recognition or inspections. Payload capacity is defined as the maximum amount of weight that the robot can carry, including the material to be carried, the gripper, and other tools on the robotic arm.
Food, pharmaceutical, and consumer-goods plants use robots for different products and pack styles. In one pouch-loading cell, a robot achieved 30+ picks per minute, compared with 10-20 picks per minute for manual operators. This result shows what a well-matched task can achieve, not a promise for every line. Equipment must be chosen by production teams based on product handling, production requirements, and available space.
Important Points
  • Robots can grasp, package, inspect, and transport products, depending on the system configuration.
  • Cycle time and precision vary according to the process performed.
  • Payload includes the product, gripper, and arm-mounted tooling.
  • Different products call for different tools and line layouts.
  • Production teams should start with a clear production need.
The right fit starts with the products, pace, and safety conditions of the line we need to improve.

How Packaging Robots Work within a Production Line

The packaging robot follows programmed movements and sensor information to place products from one machine to another or into packaging. The packaging process can be carried out in one process or several interrelated processes.

What Packaging Processes Can Be Automated with Robots?

Processes that robots can perform include picking and placing of goods, package inspection, labeling, carton erection, case packing, palletizing, and depalletizing. Additionally, robots used in food packaging are capable of sorting various foods by using vision technology. Other equipment may be added to the system for checking fill levels, seals, labels, date codes, or contamination in the case of contamination.
Robots used for pharmaceutical lines can load blisters or cartons, while for consumer goods, robots can load bottles or packed products.
Automatic twin-axis case packing robots can use vacuum cups for pouches and cartons, mechanical grippers for rigid products, and multi-pick tooling for groups of products. A 2×3 vacuum cup array can load six pouches in one cycle. Some systems can quickly change product programs, but the amount of time required depends on tooling and product range and machine configuration.
Automatic twin-axis case packing robot for industrial packaging automation

How Are Robot Types Suitable for Packaging Activities?

The Delta robot type is best suited for high-speed picking operations, the SCARA robot type is best suited for rapid movements in a horizontal plane, while six-axis articulated robots perform sophisticated movements. The collaborative robots can operate in proximity to human beings if proper safety measures are taken into account, although they might not fulfill the stringent cycle time requirements. For more information about collaborative robot applications and safety considerations, see the International Federation of Robotics' explanation of collaborative industrial robots.
There is an increasing interest in the field of the food robotics market owing to the desire of food manufacturers to automate packaging activities. However, the market size, market share, and forecast figures differ from one study to another; therefore, they need to be cross-verified from the original market study reports.
Vision-guided delta robots are capable of picking up different food items at high speeds depending upon food item, tooling design, and system setup. When comparing models, consider payload, reach, cycle time, and the tooling required for the task.
Robot/model
Payload
Reach
Suitable work
FANUC delta robots
Varies by model
Varies by model
Pick-and-place; case, tray, pouch, or blister loading
FANUC SR-series
Varies by model
Varies by model
Pick-and-place and handling tasks
FANUC M-10-series
Varies by model
Varies by model
Pick-and-place, case packing, and small-parts handling
FANUC M-20-series
Varies by model
Varies by model
Case packing and tray loading
FANUC M-410-series
Varies by model
Varies by model
Palletizing and heavy-case handling
Test packaging machine tooling with the real product and box, not just the ideal product used during the design stage.

What Should We Do Before Packing Automation?

No other packaging cell should be selected for use in the food production line unless the design of the cell satisfies the current criteria of cleanability, washdown ability, and safety.

How Food Hygiene and Robotic Safety Influence Cell Design

Contact surfaces with food products must be made of materials that are nonporous and nonabsorbent. Common choices include 304 or 316 stainless steel and suitable food-contact polymers. Surface finish requirements depend on the equipment design, cleaning process, and applicable food-safety requirements.
The required ingress protection rating also depends on the installation environment. Equipment in general food-packaging areas may have different protection requirements from components exposed to direct washdown. For components that need to work under wet conditions, those with an IP67 or IP69K rating could possibly be selected.
Evaluate the guarding and accessibility according to all pertinent regulations, such as OSHA 1910.212, ANSI/RIA R15.06, ANSI B11.19, and ISO 10218-1 and 10218-2. Guard dimensions, floor clearance, and interlocked access points should be determined through the machine risk assessment and site-specific conditions.

How to Test the Line and Estimate the Payback

Project costs depend on labor, output, product mix, and the state of the existing line. We can build a useful estimate by recording costs and testing the real work before commissioning. For end-of-line applications that involve both case packing and palletizing, collaborative palletizing robots can be considered as part of an integrated automation setup.
  • Do full-loaded labor cost calculations, instead of just the basic wage rate.
  • Include the cost of turnover and accidents, along with the hourly wage rate.
  • Try out the product and the box with the tooling and conveyor lengths being evaluated.
  • Do a payback analysis based on the needs of the application and its environment.
For instance, three people per shift for two shifts at an hourly rate of $20 is a yearly labor cost of $249,600, with 52 weeks of work in a year and 40 hours per person per week.
A 24-36-month payback period can be used as a project evaluation target, although the actual result depends on cycle rate, product variety, existing infrastructure, labor costs, and system complexity. Before committing, run the real product and carton through the proposed tooling and conveyor layout.
Collaborative palletizing robot stacking cartons in an automated production line

Conclusion

The strongest automation choice is the one that solves a defined production bottleneck without compromising product handling or safe operation. We get a better design when we start with the real work, rather than choosing a robot first.
Map one packaging bottleneck and record its products, output target, and changeover needs. Include the space, conveyor handoffs, and operating conditions around that task. Those details give a cell designer a clear starting point and help our team judge whether the proposed setup fits the line.
We can start by documenting one target task, its products, its required pace, and the constraints around the line.

FAQ

Can one packaging robot handle multiple product sizes?
Yes, one packaging robot can handle multiple sizes when its payload and end-of-arm tooling cover the full range. A pouch and carton may need different gripping surfaces, even when their weights match. Plan a tooling change when size, shape, or surface makes one grip unreliable. Test the smallest and largest items in the product range.
Can we add a packaging robot to an existing production line?
Yes, provided that there is sufficient space to accommodate the robot along with the existing cellular layout, and also the cycle time is appropriate for production needs. Then, integration of the robot with the existing process can be considered. Care should be taken regarding product entry and exit points and communication between the robot and other machines on the shop floor.
Does a unique robot have to be built for each SKU?
Not necessarily. The same robot can work with different SKUs through common tooling and different product programs. The items should fit within the gripper's size range, and the product and carton should be tested before production. Changes in size, weight, shape, or packaging style might require adjustments to the tooling or case pattern.
What needs to be prepared before requesting a quote for packaging automation?
Prepare product samples, packaging, carton specifications, desired output, shift plans, SKU mix, and production line limitations. Consider noting the method of transport for incoming products and where the cases are going. Include any changes in product size or packaging between shifts.
Is it possible for a collaborative robot to operate on a high-speed packaging line?
Not always. The collaborative robot must be able to perform the operation within the required cycle time, taking its rated speed and payload at reach into account. Its operating speed might not be suitable for some high-speed packaging operations. The comparison should be made on the entire task and not only on the robot's movement.

Contact

Leave your information and we will contact you.

Contact

E-mail: info@techflowbot.com

Tel: +86 18616129085

Add: 99 Shenmei Road, Pudong New District, Shanghai